Asus E7627 Computer Hardware User Manual


 
ASUS MAXIMUS V EXTREME
6-3
Chapter 6
5. Connect two independent auxiliary
power sources from the power supply
to the two graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.
6.1.4 Installing three CrossFireX™ graphics cards
1. Prepare three CrossFireX-ready graphics cards.
2. Insert the three graphics card into the PCIEX16 slots. If your motherboard has more
than three PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the
PCIEX16 slots recommended for multi-graphics card installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the two
CrossFireX bridge connectors to the
goldngers on each graphics card.
Ensure that the connectors are rmly
in place.
5. Connect three independent auxiliary
power sources from the power supply
to the three graphics cards separately.
6. Connect a VGA or a DVI cable to the
graphics card.