Filter
Top Products
3-20
Chapter 3: BIOS setup
Chapter 3
The following item appears only when you set the CPU Cache Voltage to [Adaptive Mode].
Additional Turbo Mode CPU Cache Voltage [Auto]
Allows you to add voltage for Turbo Mode CPU Graphics. Use the <+> or <-> keys to
adjust the value. The values range from 0.001V to 1.920V with a 0.001V interval.
CPU System Agent Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU System Agent Voltage Offset [Auto]
Allows you to congure the amount of voltage fed to the system agent of the processor
including its PCIe controller and power control unit. Increase the voltage when
increasing DRAM frequency. Use the <+> or <-> keys to adjust the value. The values
range from 0.001V to 0.999V with a 0.001V interval.
CPU Analog I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Analog I/O Voltage Offset [Auto]
Allows you to congure the amount of voltage fed to the analog portion of the I/O on
the processor. By default, this item takes the standard value of the installed CPU.
Increase the voltage when increasing DRAM frequency. You can use the <+> or <->
keys to adjust the value. The values range from 0.001V to 0.999V with a 0.001V
interval.
CPU Digital I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
Allows you to congure the amount of voltage fed to the digital portion of the I/O on the
processor. By default, this item takes the standard value of the installed CPU. Increase
the voltage when increasing DRAM frequency. Increase the amount of voltage when
increasing DRAM frequency. Use the <+> or <-> keys to adjust the value. The values
range from 0.001V to 0.999V with a 0.001V interval.
SVID Support [Auto]
When overclocking, set this item to [Enabled]. Disabling this item would stop the processor
from communicating with the external voltage regulator. Conguration options: [Auto]
[Disabled] [Enabled]
• We recommend that you disable this function when overclocking.
• The following item appears only when you set SVID Support to
[Enabled].