Filter
Top Products
CPU Analog I/O Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the analog portion of the I/O on the
CPU. By default, this item takes the standard value of the installed CPU. Increase the amount
of voltage to enhance the overclocking capability. You can use the <+> or <‑> keys to adjust
the value. The values range from 0.001V to 0.999V with a 0.001V interval.
2.5.20 CPU Digital I/O Voltage Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Digital I/O Voltage Offset [Auto]
This item allows you to set the amount of voltage fed to the digital portion of the I/O on the
processor. By default, this item takes the standard value of the installed CPU. Increase the
amount of voltage to enhance the overclocking capability. You can use the <+> or <‑> keys to
adjust the value. The values range from 0.001V to 0.999V with a 0.001V interval.
2.5.21 SVID Support [Auto]
Set this item to [Enabled] when overclocking your system. Disabling this item stops the
CPU from communicating with the external voltage regulator. Conguration options: [Auto]
[Disabled] [Enabled]
The following item appears only when you set SVID Support to [Enabled].
SVID Voltage Override [Auto]
This item allows you to set the SVID Voltage override. By default, this item takes the standard
value of the installed CPU. You can use the <+> or <‑> keys to adjust the value. The values
range from 0.001V to 2.440 V with a 0.001 V interval.
2.5.22 CPU Input Voltage(VCCIN) [Auto]
Allows you to set the input voltage for the CPU by the external voltage regulator. You can
use the <+> or <‑> keys to adjust the value. The values range from 0.800V to 2.700V with a
0.010V interval.
2.5.23 DRAM Voltage [Auto]
Allows you to set the DRAM Voltage. You can use the <+> or <‑> keys to adjust the value.
The values range from 1.1850V to 1.8000V with a 0.0050V interval.
According to Intel CPU specications, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend that you install the DIMMs with the voltage
requirement below 1.65V.
2.5.24 PCH VLX Voltage [Auto]
This item allows you to set the I/O voltage on the PCH (Platform Controller Hub). You can
use the <+> or <‑> keys to adjust the value. The values range from 1.1850V to 2.1350V with
a 0.0050V interval.
ASUS H97-PLUS 2‑27