Filter
Top Products
ASUS J1800I-C
1-13
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
J1800I-C
J1800I-C Fan connectors
CPU_FAN
CHA_FAN
CPU FAN PWM
CPU FAN SENSE
CPU FAN VCC
GND
CHA FAN PWM
CHA FAN SENSE
CHA FAN VCC
GND
6. USB 2.0 connector (10-1 pin USB_23)
This connector is for USB 2.0 ports. Connect the USB module cable to this connector,
then install the module to a slot opening at the back of the system chassis. This
USB connector complies with USB 2.0 specication that supports up to 480 Mbps
connection speed.
Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!
The USB module cable is purchased separately.
J1800I-C
J1800I-C USB 2.0 connectors
+5V
USB5-
USB5+
GND
(NC)
+5V
USB6-
USB6+
GND
USB_23
PIN 1