Filter
Top Products
1-14
Chapter 1: Product introduction
7. Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1/2)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drive or optical drive via
Serial ATA 3.0 Gb/s signal cables.
• To congure the default SATA type in BIOS, click Advanced Mode > Advanced tab >
SATA Conguration > SATA Mode.
• When using hot-plug and NCQ, set the
SATA Mode item in the BIOS to [AHCI Mode].
See section 2.5.3 SATA Conguration for details.
SATA3G_2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
SATA3G_1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
J1800I-C
J1800I-C SATA 3.0Gb/s connectors
J1800I-C
J1800I-C TPM connector
PIN 1
TPM
S_PWRDWN
GND
+3VSB
NC
LAD0
+3V
LAD3
PCIRST#
FRAME
PCICLK
NC
CLK_RUN
SERIRQ
NC
GND
LAD1
LAD2
NC
GND
8. TPM connector (20-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certicates, passwords and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.