Asus M2N-L Computer Hardware User Manual


  Open as PDF
of 108
 
4-26 Chapter 4: BIOS setup
4.5.4 APM Conguration
APM Conguration
Resume on PME# [Disabled]
Resume on Ring [Disabled]
Resume on RTC Alarm [Disabled]
Restore on AC Power Loss [Last state]
Resume On PME# [Disabled]
When this item is set to [Enabled]. A PME (Power Management Event) can turn on
the system. Conguration Options: [Disabled] [Enabled]
Resume On Ring [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Conguration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date/ RTC Alarm Hour/ RTC Alarm Minute/
RTC Alarm Second will become user-congurable with set values.
Conguration options: [Disabled] [Enabled]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power Off
Power On
Last State
Options
 previous next