Filter
Top Products
ASUS M2S-X
1-25
M2S-X
R
M2S-X
ATX Power Connector
+12V DC
GND
+12V DC
GND
ATX12V
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
EATXPWR
• Use of an ATX 12 V Specication 2.0-compliant power supply unit
(PSU) that provides a minimum power of 350 W is recommended for
a fully-congured system.
• Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
• Use of a power supply unit (PSU) with a higher power output
is recommended when conguring a system with more power-
consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
• Make sure that your PSU can provide at least the minimum power
required by your system.
4. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply plugs. The power
supply plugs are designed to t these connectors in only one
orientation. Find the proper orientation and push down rmly until the
connectors completely t.