Asus M2V-TVM Computer Hardware User Manual


 
2-30 Chapter 2: BIOS Setup
2.6.2 Boot Settings Config uratio n
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some Power On Self Tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items. Conguration
options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
Allows you to enable or disable the full screen logo display feature.
Conguration options: [Disabled] [Enabled]
Make sure that the above item is set to [Enabled] if you want to use the
ASUS MyLogo2™ feature.
BootSettingsConguration 
QuickBoot [Enabled]
FullScreenLogo [Enabled]
AddOnROMDisplayMode [ForceBIOS]
BootupNum-Lock [On]
PS/2MouseSupport [Auto]
Waitfor‘F1’IfError [Enabled]
Hit‘DEL’MessageDisplay [Enabled]
Interrupt19Capture [Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Conguration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Conguration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Conguration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when error
occurs. Conguration options: [Disabled] [Enabled]