Filter
Top Products
ASUS MAXIMUS V EXTREME
3-15
Chapter 3
DRAM Power Thermal Control [110]
A higher temperature brings a wider DRAM power thermal range, and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to
adjust the value. The values range from 110 to 131.
DO NOT remove the thermal module. The thermal conditions must be monitored.
VCCIO
The sub-items in this menu allow you to set the VCCIO settings.
VCCIO Switching Freq [Auto]
Allows you to switch the VCCIO frequency
Conguration options: [Auto] [1X] [1.65X]
VCCIO Full Phase Control [Enabled]
Allows you to enable or disable the VCCIO Full Phase Control.
Conguration options: [Auto] [Disabled] [Enabled]
VCCIO Over-Current Protection [Enabled]
Allows you to enable or disable the VCCIO Over-Current Protection.
Conguration options: [Disabled] [Enabled]
VGA Tweakers’ Paradise
The sub-items in this menu allows you to set the VGA settings.
VGA +3.3V AUX Voltage [Auto]
Allows you to raise or reduce an auxiliary power supply support for PCIe slots. This
helps the VGA cards’ overclocking settings. Use the <+> and <-> keys to adjust the
value. The values range from 2.900V to 3.900V with 0.100V interval.
PLX +0.9V Core Voltage [Auto]
Allows you to increase or decrease the core voltage of PLX GEN 3.0 bridge chip. The
voltage setting is disabled if no cards are inserted in its allocated PCIe slots. Use the
<+> and <-> keys to adjust the value. The values range from 0.600V to 1.600V with
0.015V interval.
PLX +1.8 AUX Voltage [Auto]
Allows you to increase or decrease the auxiliary voltage of PLX GEN 3.0 bridge chip.
The voltage setting is disabled if no cards are inserted in its allocated PCIe slots. Use
the <+> and <-> keys to adjust the value. The values range from 1.200V to 2.500V with
0.050V interval.