Asus MES-VM Computer Hardware User Manual


 
ASUS MES-VM User’s Manual 13
3. HARDWARE SETUP
Layout Contents
3. H/W SETUP
3.2 Layout Contents
Motherboard Settings
1) VEN_DIS/AUDIOEN p. 14 Video & Audio Settings (Enable/Disable)
2) FS0, FS1, FS2, FS3 p. 15 CPU External Clock (BUS) Frequency Selector
3) BF0, BF1, BF2, BF3 p. 15 CPU:BUS Frequency Multiple
Expansion Slots
1) DIMM1, DIMM2 p. 16 168-Pin DIMM Memory Support
2) Socket 370 p. 18 Central Processing Unit (CPU) Socket
3) SLOT1 p. 19 16-bit ISA Bus Expansion Slots
*
4) PCI1, PCI2, PCI3 p. 19 32-bit PCI Bus Expansion Slots
Connectors
1) PS2KBMS p. 21 PS/2 Mouse Connector (6-pin female)
2) PS2KBMS p. 21 PS/2 Keyboard Connector (6-pin female)
3) USB p. 22 Universal Serial BUS Ports 1 & 2 (Two 4-pin female)
4) PRINTER p. 22 Parallel Port Connector (25-pin female)
5) COM1 p. 22 Serial Port COM1 Connector (9-pin male)
6) VGA p. 23 Monitor (VGA) Output Connector (15-pin female)
7) GAME_AUDIO p. 23 Joystick/Midi Connector (15-pin female) (optional)
8) GAME_AUDIO p. 23 Audio Port Connectors (Three 1/8” female) (optional)
9) PRIMARY/SECONDARY IDE p. 24 Primary/Secondary IDE Connectors (Two 40-1 pins)
10) FLOPPY p. 24 Floppy Disk Drive Connector (34-1pins)
11) WOL_CON p. 25 Wake-On-LAN Header (3 pins)
12) CHA_FAN, CPU_FAN p. 25 Chassis and CPU Fan Connectors (Two 3 pins)
13) IR p. 26 IrDA-Compliant Infrared Module Connector (5 pins)
14) MODEM/CD_IN/CDROM p. 26 Internal Audio Connectors (Three 4-pin)
15) SPEAKER (PANEL) p. 28 System Warning Speaker Connector (4 pins)
16) SMI (PANEL) p. 28 SMI Switch Lead (2 pins)
17)
KEYLOCK (
PANEL
)
p. 28 Keyboard Lock Switch Lead (2 pins)
18) MSG.LED (PANEL) p. 28 System Message LED (2 pins)
19) RESET (PANEL) p. 29 Reset Switch Lead (2 pins)
20)
PWR.LED (
PANEL
)
p. 29 System Power LED Lead (3-1 pins)
21) IDELED (PANEL) p. 29 IDE LED Activity Light (2 pins)
22) PWR.SW (PANEL) p. 29 ATX Power & Soft-Off Switch Lead (2 pins)
23) ATXPWR p. 29 ATX Power Supply Connector (20 pins)
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards must not
use this address; otherwise, conflicts will occur.