Filter
Top Products
70 ASUS P2B-L/P2B-S/P2B-LS User’s Manual
NetWare server
In AUTOEXEC.NCF, Load E100B.LAN and add the following statement (you must
include the equal sign for servers):
FORCEDUPLEX=2
SPEED=100 (or 10 if 10BASE-T)
For more information, see the README file for NetWare servers.
Windows NT
While running Windows NT:
1. From the Control Panel, double-click the Intel PROSet icon.
2. PROSet examines your system and displays the Adapter Setup window.
Windows 95
While running Windows 95:
1. From the Control Panel, double-click the Intel PROSet icon.
2. PROSet examines your system and displays the Adapter Setup window. If you
have multiple adapters, click the adapter you are configuring (you can identify it
by its Ethernet address). Each adapter must be configured separately.
3. From the window that appears, click Change.
4. From the Adapter Setup window, click the menu for Network Speed.
5. Click 100 or 10 Mbps, depending on hub speed.
6. Click the menu for Duplex Mode
7. Click Full.
8. Click OK when finished.
9. Click OK to restart Windows 95.
Other operating systems
See the Adapter Installation and Special Configurations README file. “Push” Instal-
lation for Windows 95
If you are a LAN Administrator setting up server-based push installation of Windows
95 as defined in Microsoft Windows 95 Resource Kit, additional steps are required for
this network interface or adapter.
VII. NETWORK
Duplex Mode
VII. NETWORK INTERFACE