Asus P2B-S Mouse User Manual


 
ASUS P2B-L/P2B-S/P2B-LS User’s Manual 73
VII. NETWORK
Problems/Solutions
VII. NETWORK INTERFACE
The network interface or adapter stopped working when another network in-
terface or adapter was added to the computer.
Make sure the cable is connected to the motherboard’s network interface or RJ45
port.
Make sure your PCI BIOS is current.
Make sure the other network interface or adapter supports shared interrupts. Also,
make sure your operating system supports shared interrupts — OS/2* doesn’t.
The interface stopped working without apparent cause.
Try reconnecting the cable to the RJ45 port first.
The network driver files may be corrupt or deleted. Delete and then reinstall the
drivers.
Try another motherboard of the same model.
Run the diagnostics.
The Wake On LAN feature is not working.
Make sure the WOL cable is attached and power is applied to the computer.
Check the BIOS for its WOL setting. Some computers may need to be configured
to WOL.
Make sure the network cable is fully attached to the network interface or adapter.
Link LED does not light when power is connected.
Make sure WOL cable is attached and power is applied to computer.
Make sure network cable is attached at both ends.