Filter
Top Products
2-18
Chapter 2: Hardware information
4. CPU Core:Bus frequency multiple (DSW2 Switches 1-4)
This option sets the frequency multiple between the CPU internal and
external frequencies. This must be set in conjunction with the CPU Bus
Frequency.
Make sure that the JEN1 jumper is set to jumper mode before setting
the above switches.
The option to set the CPU core:bus frequency multiple is available only
on unlocked CPUs. If you are using a locked CPU, setting the switches
does not produce any effect.
P4B533-V
®
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
ON
1234
P4B533-V CPU Frequency
Multiple Selection
DSW2
8.0x
10.0x
11.0x
12.0x
16.0x
15.0x
14.0x
13.0x
17.0x
18.0x
19.0x
20.0x
24.0x23.0x21.0x 22.0x
Set the CPU frequency only to the recommended settings.
Frequencies other than the recommended CPU bus frequencies are
not guaranteed to be stable.