Filter
Top Products
2-20
Chapter 2: Hardware information
4. LAN setting (3-pin LAN_EN)
(on LAN models only)
This jumper allows you to enable or disable the onboard Local Area
Network (LAN) feature. The default setting is on pins 2-3 (Enabled).
®
P4B-M
P4B-M On Board Lan Setting
Enabled
(Default)
Disabled
LAN_EN
12 23
Figure 2-26 LAN Settings
5. Bass Center setting (3-pin BCS1, BCS2)
This jumper allows you to select the speaker output for a 6-channel
audio system. No audio standard exists for the three pick-up surfaces
on male audio ports, so it is necessary to switch the jumpers from the
default position Center/Bass (pins 2-3) to Bass/Center (pins 1-2) to re-
route signals on the internal leads of the Line-In, Line-Out, and Mic
ports.
Use the audio driver included in the support CD to install the multi-
channel audio feature.
Figure 2-27 Bass Center Settings
®
P4B-M
P4B-M Bass Center Setting
(CENTER/BASS)
(Default)
23
BCS1
BCS2
(BASS/CENTER)
12
BCS1
BCS2
BCS