Asus P4B-MX Computer Hardware User Manual


 
ASUS P4B-MX motherboard user guide
4-17
4.4.1 Chip Configuration
SDRAM Configuration [By SPD]
This parameter allows you to set the optimal timings for items 25,
depending on the memory modules that you are using. The default setting
is [By SPD], which configures items 25 by reading the contents in the
SPD (Serial Presence Detect) device. The EEPROM on the memory
module stores critical information about the module, such as memory type,
size, speed, voltage interface, and module banks.
Configuration options: [User Defined] [By SPD]
SDRAM CAS Latency [3T]
This item controls the latency between the SDRAM read command and
the time the data actually becomes available.
The SDRAM CAS Latency parameter appears only when you set the
SDRAM Configuration to [User Defined].
SDRAM RAS to CAS Delay [3T]
This item controls the latency between the SDRAM active command and
the read/write command.
The SDRAM RAS to CAS Delay parameter appears only when you set
the SDRAM Configuration to [User Defined].