Filter
Top Products
ASUS P4P800 Deluxe motherboard user guide
2-27
4. RAID ATA/133/100/66/33 connectors
(40-1 pin PRI_RAID1, SEC_RAID1)
These connectors support either RAID 0, RAID 1, RAID 0 + 1 or JBOD
configuration through the onboard VIA
®
6410 controller. You can use
the RAID feature to set up a disk array configuration and to support
additional IDE devices.
P4P800
®
P4P800 RAID Connectors
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
PRI_RAID1
PIN 1
PIN 1
SEC_RAID1
5. SMBus connector (6-1 pin SMB1)
This connector allows you to connect SMBus (System Management
Bus) devices. Devices communicate with an SMBus host and/or other
SMBus devices using the SMBus interface.
P4P800
®
P4P800 SMBus Connector
SMB1
1
SMBCLK
Ground
SMBDATA
+3V
FLOATING
Important notes on the RAID feature:
• By default, the drive that you connect to the PRI_RAID
connector follow the ATA133/100/66/33 protocol as an
independent drive, not as a disk array.
• The RAID/SATA controller chipset does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.
• RAID feature only supported in Microsoft Operating
Systems.