Filter
Top Products
1-16
Chapter 1: Product introduction
1.10.3 PCI slots
There are five 32-bit PCI slots on this motherboard. The slots support PCI cards
such as a LAN card, SCSI card, USB card, and other cards that comply with PCI
specifications.
1.10.4 AGP slot
This motherboard has an Accelerated Graphics Port (AGP) slot that supports AGP
8X/4X (+1.5V) cards. When you buy an AGP card, make sure that you ask for one
with +1.5V specification.
Note the notches on the card golden fingers to ensure that they fit the AGP slot on
your motherboard.
If installing the ATi 9500 or 9700 Pro Series VGA cards, use only the card
version PN xxx-xxxxx-30 or later, for optimum performance and overclocking
stability.
P4P800S SE
®
P4P800S SE Accelerated Graphics Port (AGP)
Keyed for 1.5v
Install only +1.5V AGP cards. This motherboard does not support 3.3V AGP
cards.
• When installing long PCI cards, it is recommended that to install in PCI
slot 3.
• Long PCI cards installed in PCI slot 1 or 2 may interfere with the SATA
connectors.
• PCI 64-bit cards installed in PCI slot 5 may interfere with the USB
connectors and PCI 64-bit cards installed in PCI slot 4 may interfere with
the RAID connector.