2-18
Chapter 2: BIOS information
2.4.2 CPU Configuration
The items in this menu show the CPU-related information auto-detected by BIOS.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Manufacturer : Intel(R)
Brand String : Intel(R) Pentium(R) 4 CPU 1.73GHz
Frequency : 1733 MHz
Ratio Status : Locked
Ratio Actual Value : 13
CPUID Maximum Value Limit [Disabled]
Hyper Threading Technology [Enabled]
Configure advanced CPU settings
The item Hyper-Threading Technology appears only if you installed an Intel
Pentium 4 CPU that supports this feature. See page1-11 for details.
2.4.3 Chipset
The Chipset menu items allow you to change the advanced chipset settings. Select
an item then press Enter to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
Configure DRAM Timing by SPD [Enabled]
Memory Acceleration Mode [Auto]
DRAM Idle Timer [Auto]
DRAm Refresh Rate [Auto]
Graphic Adapter Priority [AGP/PCI]
Graphics Aperture Size [ 64 MB]
Spread Spectrum [Enabled]
ICH Delayed Transaction [Enabled]
MPS Revision [1.4]
CPUID Maximum Value Limit [Disabled]
This item allows you to enable or disable support of older OS for CPU ID maximum
value limit . Configuration options: [Disabled] [Enabled]
Hyper-Threading Technology [Enabled]
This item allows you to enable or disable the processor Hyper-Threading
Technology. Configuration options: [Disabled] [Enabled]