Asus P4P800S-X Computer Hardware User Manual


 
2-24
Chapter 2: BIOS Setup
2.5 Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM) feature. Select an item then press <Enter> to display the
configuration options.
2.5.1 Suspend Mode [S1 (POS) & S3 (STR)]
Allows you to select the ACPI state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only]
2.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
2.5.3 ACPI 2.0 Support [No]
Allows you to add more tables for ACPI 2.0 specifications.
Configuration options: [No] [Yes]
2.5.4 ACPI APIC Support [Enabled]
Enables or disables the ACPI support in the ASIC. When set to Enabled, the ACPI
APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
2.5.5 BIOS -> AML ACPI Table [Enabled]
Allows you to enable or disable the inclusion of the BIOS ->AML exchange pointer
to (X)RSDT pointer list. Configuration options: [Disabled] [Enabled]
Suspend Mode [S1 (POS) & S3 (STR]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [No]
ACPI APIC Support [Enabled]
BIOS-->AML ACPI table [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
Do not change the APIC support settings after OS installation, otherwise, a
system boot failure may occur.