Filter
Top Products
2-22
Chapter 2: BIOS information
2.5.5 APM Configuration
Restore on AC Power Loss [Always OFF]
When set to Always OFF, the system goes into off state after an AC power loss.
When set to Always On, the system goes on after an AC power loss. When set to
Keep Previous State, the system goes into either off or on state whatever was the
system state before the AC power loss. Configuration options: [Always OFF]
[Always On] [Keep Previous State]
Power On by PS2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Power On by PS2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS2 mouse to turn on
the system. This feature requires an ATX power supply that provides at least 1A on
the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On by Internal MAC LAN [Disabled]
Enables or disables MAC wake from sleep state.
Configuration options: [Disabled] [Enabled]
Power On by PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Power On by External Modem [Disabled]
Allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Restore On AC Power Loss [Always OFF]
Power On by PS2 Keyboard [Disabled]
Power On by PS2 MOUSE [Disabled]
Power On by Internal MAC LAN [Disabled]
Power On by PCI Devices [Disabled]
Power On by External Modems [Disabled]
Power On by RTC Alarm [Disabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first try.
Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.