Filter
Top Products
ASUS P4S800-MX SE motherboard
1-21
6. CPU fan connector (3-pin CPU_FAN1)
The CPU fan connector support cooling fans of 350mA~740mA (8.88W max.)
or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cable to the fan
connector on the motherboard, making sure that the black wire of each cable
matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Lack of sufficient
air flow within the system may damage the motherboard components. These
are not jumpers! DO NOT place jumper caps on the fan connectors!
P4S800-MX SE
P4S800-MX SE CPU Fan connector
CPU_FAN1
GND
Rotation
+12V
5. Front panel audio connector (10-1 pin FP_AUDIO1)
This is an interface for the front panel cable that allows convenient connection
and control of audio devices.
Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins
LINE OUT_L/BLINE_OUT_L are shorted with jumper caps. Remove the caps
only when you are connecting the front panel audio cable.
P4S800-MX SE
P4S800-MX SE Front panel audio connector
FP_AUDIO1
BLINE_OUT_L
MIC2
Line out_R
Line out_L
BLINE_OUT_R
NC
MICPWR
+5VA
AGND