Filter
Top Products
ASUS P5CR-VMASUS P5CR-VM
ASUS P5CR-VMASUS P5CR-VM
ASUS P5CR-VM
2-192-19
2-192-19
2-19
3.3.
3.3.
3.
USB device wake-up (3-pin USBPW12, USBPW34,USB device wake-up (3-pin USBPW12, USBPW34,
USB device wake-up (3-pin USBPW12, USBPW34,USB device wake-up (3-pin USBPW12, USBPW34,
USB device wake-up (3-pin USBPW12, USBPW34,
USBPW56, USBPW78)USBPW56, USBPW78)
USBPW56, USBPW78)USBPW56, USBPW78)
USBPW56, USBPW78)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode using the connected USB devices. Set to +5VSB to wake up
from S4 sleep mode (no power to CPU, DRAM power supply in reduced
power mode).
•
The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise, the
system would not power up.
•
The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
2.2.
2.2.
2.
CPU fan mode selection (3-pin FM_CPU1, FM_CPU2)CPU fan mode selection (3-pin FM_CPU1, FM_CPU2)
CPU fan mode selection (3-pin FM_CPU1, FM_CPU2)CPU fan mode selection (3-pin FM_CPU1, FM_CPU2)
CPU fan mode selection (3-pin FM_CPU1, FM_CPU2)
These jumpers allow you to connect either a 3-pin or a 4-pin fan cable
plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these
jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins
2-3 if you are using a 4-pin plug.
P5CR-LS
3221
P5CR-VM FM_CPU Setting
FM_CPU2
FM_CPU1
DC mode PWM
(Default)
12
23
DC mode PWM
(Default)
P5CR-LS
P5CR-VM USB device wake-up
USBPW12
(Default)
+5V +5VSB
23
12
USBPW34
USBPW78
(Default)
+5V +5VS
B
2312
USBPW56
(Default)
+5V +5VSB
23
12