Filter
Top Products
2-202-20
2-202-20
2-20
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
4.4.
4.4.
4.
Keyboard and mouse power (3-pin KBPWR1)Keyboard and mouse power (3-pin KBPWR1)
Keyboard and mouse power (3-pin KBPWR1)Keyboard and mouse power (3-pin KBPWR1)
Keyboard and mouse power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard and mouse
wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the
computer when you press a key on the keyboard (the default is the
Space Bar) or click the mouse. This feature requires an ATX power
supply that can supply at least 1A on the +5VSB lead, and a
corresponding setting in the BIOS.
5.5.
5.5.
5.
Gigabit LAN controller setting (3-pin LAN_EN1)Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)Gigabit LAN controller setting (3-pin LAN_EN1)
Gigabit LAN controller setting (3-pin LAN_EN1)
These jumpers allow you to enable or disable the onboard Broadcom
BCM5721 Gigabit LAN controller. Set to pins 1-2 to activate the
Gigabit LAN feature.
P5CR-LS
P5CR-VM LAN_EN1 setting
Enable
(Default)
Disabl
e
LAN_EN1
2
1
2
3
P5CR-LS
P5CR-VM Keyboard and mouse power setting
KBPWR1
(Default)
+5V +5VS
B
2312