Filter
Top Products
2-342-34
2-342-34
2-34
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware informationChapter 2: Hardware information
Chapter 2: Hardware information
•
System power LED (Green 3-pin PLED)System power LED (Green 3-pin PLED)
System power LED (Green 3-pin PLED)System power LED (Green 3-pin PLED)
System power LED (Green 3-pin PLED)
This 3-pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
•
Hard disk drive activity LED (Red 2-pin HDLED)Hard disk drive activity LED (Red 2-pin HDLED)
Hard disk drive activity LED (Red 2-pin HDLED)Hard disk drive activity LED (Red 2-pin HDLED)
Hard disk drive activity LED (Red 2-pin HDLED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
•
System warning speaker (Orange 4-pin SPEAKER)System warning speaker (Orange 4-pin SPEAKER)
System warning speaker (Orange 4-pin SPEAKER)System warning speaker (Orange 4-pin SPEAKER)
System warning speaker (Orange 4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
•
ATX power button/soft-off button (Yellow 2-pin PWRBTN)ATX power button/soft-off button (Yellow 2-pin PWRBTN)
ATX power button/soft-off button (Yellow 2-pin PWRBTN)ATX power button/soft-off button (Yellow 2-pin PWRBTN)
ATX power button/soft-off button (Yellow 2-pin PWRBTN)
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
•
Reset button (Blue 2-pin RESETCON)Reset button (Blue 2-pin RESETCON)
Reset button (Blue 2-pin RESETCON)Reset button (Blue 2-pin RESETCON)
Reset button (Blue 2-pin RESETCON)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
14.14.
14.14.
14.
System panel connector (20-pin PANEL1)System panel connector (20-pin PANEL1)
System panel connector (20-pin PANEL1)System panel connector (20-pin PANEL1)
System panel connector (20-pin PANEL1)
This connector supports several chassis-mounted functions.
The sytem panel connector is color-coded for easy connection.
P5CR-VM
P5CR-VM System panel connector
PANEL1
FP_MLEDGND
NCPWRBTN#
+5VGND
GNDNC
+5VFP_HDLED+
NCGND
FP_PLED
+3VSBFP_NMIBNT#
GNDRESETCON
SPEAKERGND