4-18 Chapter 4: BIOS setup
Pri. Information: 6-6-6-15-4-36-6-4
The values vary depending on your settings of the following sub-items:
CAS# Latency [ 5 DRAM Clocks]
Conguration options: [ 5 DRAM Clocks] [ 6 DRAM Clocks] [ 7 DRAM Clocks]
[ 8 DRAM Clocks] [ 9 DRAM Clocks] [ 10 DRAM Clocks]
RAS# to CAS# Delay [ 5 DRAM Clocks]
Conguration options: [ 3 DRAM Clocks] [ 4 DRAM Clocks]~[ 17 DRAM
Clocks] [18 DRAM Clocks]
RAS# Precharge [ 5 DRAM Clocks]
Conguration options: [ 3 DRAM Clocks] [ 4 DRAM Clocks]~[ 17 DRAM
Clocks] [18 DRAM Clocks]
RAS# Active Time [15 DRAM Clocks]
Conguration options: [ 3 DRAM Clocks] [ 4 DRAM Clocks]~[17 DRAM
Clocks] [18 DRAM Clocks]
RAS# to RAS# Delay [Auto]
Conguration options: [Auto] [ 1 DRAM Clocks]~[15 DRAM Clocks]
The DRAM Frequency conguration options vary with the FSB Frequency
settings.
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
4.4.4 DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency.
Conguration options: [Auto] [DDR3-800 MHz] [DDR3-835MHz] [DDR3-1002MHz]
[DDR3-1066MHz] [DDR3-1111] [DDR3-1333]
4.4.5 DRAM Command Rate [Auto]
Conguration options: [Auto] [1T] [2T]
4.4.6 DRAM Timing Control [Auto]
Conguration options: [Auto] [Manual]
•
The following sub-items apprear only when you set the DRAM Timing
Control item to [Manual].
• The conguration options for some of the following items vary depending
on the DIMMs you install on the motherboard.