Filter
Top Products
5-225-22
5-225-22
5-22
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.5 Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows
®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1. Place the motherboard support CD in the optical drive.
2. When the
Drivers Drivers
Drivers Drivers
Drivers menu appears, select the RAID driver disk you wish
to create.
Browse the contents of the support CD to locate the
driver disk
utility:
IntelIntel
IntelIntel
Intel
®
RAID Driver DiskRAID Driver Disk
RAID Driver DiskRAID Driver Disk
RAID Driver Disk:
\Drivers\Chipset\Intel\IAA\F6 Install Floppy\F6flpy32
3. Insert a formatted high-density floppy disk to the floppy disk drive.
4. Follow screen instructions to complete the process.
5. After creating a RAID driver disk, eject the floppy disk, then
write-protect it to prevent computer virus infection.
To install the RAID driver:
1. Install an operating system to the selected hard disk drive. During
installation, the computer prompts you to press the
F6F6
F6F6
F 6 key if you are
installing a third-party SCSI or RAID driver.
2. Press <F6>,
then insert the RAID driver disk to the floppy disk drive.
3. Follow screen instructions to install the RAID drivers.
Refer to section “5.2.2 Drivers menu” for details.