Asus P5K-VM Computer Hardware User Manual


  Open as PDF
of 98
 
2-24 Chapter 2: BIOS setup
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI
memory above the total physical memory. Enable this option only when you
install 64-bit operating system. Conguration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Conguration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD]
[PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to decide whether to use the internal graphics device and select
the amount of memory used by the device.
Conguration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Set this item to [Disabled] if you intend to install a PCIE x16 graphics card to the
PCIE x16 slot.
PEG Port Control [Auto]
Conguration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
This item appears when the PEG Port Control item is set to [Auto].
Conguration options: [Enabled] [Disabled]
The following item appears when the Internal Graphics Mode Select item is
set to [Enabled, 1MB] or [Enabled, 8MB].
Video Function Configuration
Video Function Conguration
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [256MB]
ASMT Resolutiom [Enabled]
BIOS SETUP UTILITY
Advanced
Options
Fixed Mode
DVMT Mode
DVMT Mode Select [DVMT Mode]
Conguration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [256MB]
Conguration options: [128MB] [256MB]
ASMT Resolution [Enabled]
Conguration options: [Disabled] [Enabled]
 previous next