Filter
Top Products
2-20 Chapter 2: Hardware information
2.6 Jumpers
1. Clear RTC RAM (CLRTC)
You can clear the CMOS memory of date, time, and system setup
parameters by erasing the CMOS RTC RAM data.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3 to enable the CLRTC
function.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.
• Make sure to re-enter your previous BIOS settings after you clear the
CMOS.
• You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
P5NT WS
®
P5NT WS Clear RTC RAM
CLRTC
Normal Clear RTC
(Default)
1 2 2 3