Filter
Top Products
5-185-18
5-185-18
5-18
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
5.4.25.4.2
5.4.25.4.2
5.4.2
ULIULI
ULIULI
ULI
®®
®®
®
RAID configurations RAID configurations
RAID configurations RAID configurations
RAID configurations
The ULI
®
RAID controller supports RAID 0, RAID 1, RAID 0+1, and JBOD
configurations. Use the ULI
®
RAID BIOS Setup utility to configure a disk
array.
Entering the Silicon Image BIOS RAID Configuration UtilityEntering the Silicon Image BIOS RAID Configuration Utility
Entering the Silicon Image BIOS RAID Configuration UtilityEntering the Silicon Image BIOS RAID Configuration Utility
Entering the Silicon Image BIOS RAID Configuration Utility
To enter the Silicon Image BIOS RAID configuration utility:
1. Boot up your computer.
2. During POST, press <Ctrl+A>.
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
RAID BIOS Setup Utility (c) 2004 ULi Electronics Inc. www.uli.com.tw
Create RAID 0 Striping for Performance Select Boot Drive
Create RAID 1 Mirroring for Reliability
Create RAID 0+1 for Striping, Mirroring
Create JBOD for integrated Capacity SPACE: Select
Stripe Size 64K ↑ ↓ : Moving Cursor
Delete RAID Settings & Partition Enter: Select & Finish
Delete All RAID Settings & Partition ESC: Exit
Rebuild RAID Array
Drive Model Mode Capacity RAID Array/Type
B Channel 0 Master: XXXXXXXXXXX SATA 1 XXXXX MB
Channel 1 Master: XXXXXXXXXXX SATA 1 XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 1 XXXXX MB
Channel 3 Master: XXXXXXXXXXX SATA 1 XXXXX MB
Capacity RAID Type Stripe Size RAID Name
RAID Array A :
RAID Array B :
RAID Array C :
The Main Menu on the upper left corner allows you to select an operation
to be performed. The Main Menu options include the following:
Create RAID 0 Striping for Performance Create RAID 0 Striping for Performance
Create RAID 0 Striping for Performance Create RAID 0 Striping for Performance
Create RAID 0 Striping for Performance -
creates a new legacy RAID
set or allocates spare drives.
Create RAID 1 Mirroring for Reliability Create RAID 1 Mirroring for Reliability
Create RAID 1 Mirroring for Reliability Create RAID 1 Mirroring for Reliability
Create RAID 1 Mirroring for Reliability - creates and maintains an
identical image of data from one drive to a second drive.
Create RAID 0+1 for Striping, Mirroring Create RAID 0+1 for Striping, Mirroring
Create RAID 0+1 for Striping, Mirroring Create RAID 0+1 for Striping, Mirroring
Create RAID 0+1 for Striping, Mirroring -
creates a RAID setup with
all the benefits of both RAID 0 and RAID 1 configuration.
Create JBOD for integrated capacity Create JBOD for integrated capacity
Create JBOD for integrated capacity Create JBOD for integrated capacity
Create JBOD for integrated capacity - creates a JBOD
configuration.