Filter
Top Products
1-30 Chapter 1: Product introduction
7. ATX power connectors (24-pin EATXPWR and 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
•
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot.
• Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
• Make sure that your power supply unit (PSU) can provide at least
the minimum power required by your system.
®
P5RD2-VM
P5RD2-VM ATX Power Connectors
EATXPWRATX12V
+3Volts
+3Volts
Ground
+5Volts
+5Volts
Ground
Ground
PowerOK
+5VStandby
+12Volts
-5Volts
+5Volts
+3Volts
-12Volts
Ground
Ground
Ground
PSON#
Ground
+5Volts
+12Volts
+3Volts
+5Volts
Ground
+12VDC
GND
+12VDC
GND