Filter
Top Products
3-20 Chapter 3: Software support
3.4 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing Windows
®
2000/XP
operating system on a hard disk drive that is included in a RAID set.
To create a RAID driver disk:
1. Place the motherboard support CD into the CD-ROM drive.
2. When the Drivers menu appears, click
Make VIA VT8237 RAID Driver Disk
to create a VIA RAID driver disk
Or
Browse the contents of the support CD to locate the driver disk utility and go
to \Drivers\VIA 4 in 1 Chipset Driver for the VIA RAID driver disk utility.
3. Insert oppy disk to oppy disk drive.
4. Follow succeeding screen information to complete process.
5. Write-protect the oppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. Follow the succeeding screen instructions to complete the installation.
Refer to section “3.2.2 Drivers menu” for details.