Filter
Top Products
5-16
Chapter 5: RAID configuration
5.2.2 Adding or viewing a RAID conguration
You can add a new RAID configuration or view an existing configuration using the
View/Add
Conguration
command.
Adding a new RAID conguration
To add a new RAID configuration:
1. From the
Management Menu
, select
Congure > View/Add Conguration
, then
press <Enter>.
2. The
ARRAY SELECTION MENU
displays the available drives connected to the SATA
ports. Select the drive(s) you want to include in the RAID set, then press <Space>.
When selected, the drive indicator changes from
READY
to
ONLIN A[X]-[Y]
, where X
is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the screen.
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
LSI Software RAID Configuration Utility Ver C.05 Oct 26,2011
BIOS Version A.11.02090932R
View/Add to The Existing Configuration
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Configuration Menu
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
LSI Software RAID Configuration Utility Ver C.05 Oct 26,2011
BIOS Version A.11.02090932R
Port # 2 DISK 74.74GB HDS728080PLA380 05.01C05
Configure
Initialize
Objects
Rebuild
Check Consistency
Management Menu
Easy Configuration - ARRAY SELECTION MENU
ONLIN A00-00
ONLIN A00-01
READY
READY
0
1
2
3
PORT #