Filter
Top Products
4-22
Chapter 4: BIOS setup
4.4.8 WHEA Support
WHEA [Enabled]
Allows you to enable or disable the Windows
®
Hardware Error Architecture (WHEA) support.
Configuration options: [Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
Enables or disable
Windows Hardware Error
Architecture.
WHEA Support [Enabled]
USB transfer time-out [20 sec]
Allows you to select the USB transfer time-out value. Configuration options:
[1 sec] [5 sec] [10 sec] [20 sec]
Device reset time-out [20 sec]
Allows you to select the USB device reset time-out value. Configuration options:
[10 sec] [20 sec] [30 sec] [40 sec]
Device power-up delay [Auto]
This allows you to set the maximum time the device will take before it properly reports itself to
the Host Controller. Configuration options: [Auto] [Manual]
Enable Hibernation [Enabled]
Allows you to enable or disable the Hibernation feature (OS/S4 sleep state).
Configuration options: [Disabled] [Enabled]
ACPI Sleep State [S3 only (Suspend to RAM)]
Allows you to set the ACPI Sleep state. Configuration options: [Suspend Disabled] [S3 only
(Suspend to RAM)]
4.4.7 ACPI Settings
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [S3 only(Suspend to ...]
Enables or Disables
System ability to
Hibernate (OS/S4 Sleep
State). This option may
not be effective with
some OS.