Filter
Top Products
2-44 Chapter 2: Hardware information
Chapter 2
** Audio 2, 4, 6, or 8-channel conguration
Port Headset
2-channel
4-channel 6-channel 8-channel
Light Blue Line In Line In Line In Line In
Lime Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Mic In Mic In Mic In Mic In
Orange – – Center/Subwoofer Center/Subwoofer
Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out
Gray – – – Side Speaker Out
*LAN ports LED indications
SPEED
LED
ACT/LINK
LED
LAN port
Activity Link LED Speed LED
Status Description Status Description
OFF No link OFF 10 Mbps connection
ORANGE Linked ORANGE 100 Mbps connection
BLINKING Data activity GREEN 1 Gbps connection
• Use Clear RTC RAM jumper to clear CMOS switch to clear BIOS setup information
only when the system hangs due to overclocking.
• DO NOT insert a different connector to the external SATA port.
• DO NOT connect a keyboard/mouse to any USB3.0 port when installing Windows
operating system.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows
®
OS environment and after the USB 3.0 driver installation.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
• If you want to use the hot-plug function of the external SATA ports, you have to set the
ASMedia
®
1061 SATA controllers
item in the BIOS setting to [AHCI Mode] and install
the
ASMedia
®
SATA Controller Driver
from the motherboard support DVD. Refer to
section
3.5.6 Onboard Devices Conguration
for details.