Filter
Top Products
Chapter 2: Hardware setup2-14
2.6 Hard disk drives
The server system supports four Serial ATA hard disk drives through screw-free
hard disk drive holders.
To install a Serial ATA hard disk drive:
1. Secure the supplied HDD trays to
the HDD with four screws.
2. Carefully insert the trays with the
HDD installed and push them all
the way to the depth of the bay.
3. Connect the SATA cable to the SATA
connector on the back of the drive.
4. Connect a power plug from
the power supply to the power
connector on the back of the drive.
4 3