Asus PI4 Server User Manual


 
ASUS TS100-E7/PI4 5-3
5.1.2 Installing hard disk drives
The motherboard supports SATA hard disk drives for RAID set conguration. For
optimal performance, install identical drives of the same model and capacity when
creating a disk array.
See section
2.6 Hard disk drives
for SATA hard disk drive installation.
5.1.3 Setting the RAID item in BIOS
You must enable the RAID function in the BIOS Setup before creating RAID set(s)
using SATA HDDs. To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Main
menu >
StorageConguration
, and then press <Enter>.
3. Set the
CongureSATAas
item to [RAID].
4. Save your changes, and then exit the BIOS Setup.
Refer to Chapter 4 for details on entering and navigating through the BIOS
Setup.