Filter
Top Products
5-32
Chapter 5: Driver installation
8. Select ADPU320.HAM and press ENTER.
9. Select "Return to driver list" to accept the default slot number, and
press ENTER.
10. Press ESC, select "Return to driver summary" and press ENTER.
11. Press ESC, select "Continue" and press ENTER.
C. Installing NetWare 4.2 with an Ultra320 SCSI Controller
1. Begin installation of NetWare on your server as instructed in your
NetWare documentation.
2. When the screen "Choose the Server Drivers - Summary" appears,
select "Select additional or modify selected Disk/LAN drivers" and
press ENTER.
3. Highlight "Disk and CD-ROM Drivers" and press ENTER.
4. Highlight "Select an additional driver" and press ENTER.
5. When the screen "Choose the Server Drivers - Disk Driver" appears,
press INSERT.
6. Insert the Adaptec Ultra320 FMS Driver disk for NetWare into the
floppy drive.
7. Press F3 and specify the path to the ADPU320.HAM driver:
A:\NETWARE\V42_V50\
8. Select ADPU320.HAM and press ENTER.
9. When the message "Choose the Server Drivers - Disk Driver
Parameters" appears, select "Save parameters and load driver".
10. When prompted, press ENTER to select the slot number. Repeat until
all slot options are loaded.
11. Select "Continue installation" to continue the installation.
NOTE To load the driver automatically at server bootup, make sure
that the STARTUP.NCF file includes the line:
LOAD ADPU320.HAM SLOT=<XX>.
Novell
®
Netware
®
Server (continued)