Filter
Top Products
ASUS PU-DLS/PU-DL motherboard user guide
5-5
C. Installing the Adaptec Ultra320 driver with existing
Windows NT 4.0
1. Start Windows NT 4.0.
2. Click the Start button on the Windows NT 4.0 task bar, then point to
Settings.
3. Click the Control Panel.
4. Double-click the SCSI Adapters icon.
5. Click the Drivers tab, then click the Add button.
6. In the Install Driver window, click the Have Disk button.
7. Insert the Adaptec Ultra320 FMS driver disk in your disk drive and
press Enter. Enter the following path to the installation files and then
click OK.
\winnt40
8. In the Install Driver window, select the Adaptec Ultra320 driver from
the list. Click OK.
9. You must restart your computer for the changes to take effect. Click
Yes to restart your computer.
D. Changing Boot Controllers in Windows NT 4.0
1. With the existing controller still installed, install the Ultra320 controller
into your system. Do not attach any devices to it at this time.
2. Start Windows NT 4.0 and install the driver from the Adaptec Ultra320
driver disk.
3. Shut down Windows NT 4.0 and turn off your system.
4. Switch the bootable hard drive from the old SCSI controller to the
Ultra320 controller.
5. Power on your system.