Filter
Top Products
2-19ASUS RS500A-E6/PS4
7. Connect the data cables, by
numerial order, to the SAS
connectors labeled SAS1-4 (red)
on the motherboard.
The heatsink on PIKE 1078/PIKE 2008 Series might interfere the components
on the expansion card. Ensure that the height of the components is less than
5.8 mm.
8. Set the SGPIO_SEL1 jumper on
the backplane to pin 2-3 when
connecting data cables to the SAS
connectors on the motherboard.
6. Remove the data cables connected
to the SATA connectors on the
motherboard.
5. Insert the RAID card into the PIKE
RAID card slot. Ensure that it is
completely seated on the PIKE
RAID card slot.