Asus SABERTOOTH990FXGEN3 Computer Hardware User Manual


 
3-8
Chapter 3: BIOS setup
Chapter 3
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press
<Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Conrm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/conrm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
3.4 Ai Tweaker menu
The Ai Tweaker menu items allow you to congure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect eld
values can cause the system to malfunction.
The conguration options for this section vary depending on the CPU and DIMM model you
installed on the motherboard.
Scroll down to display other BIOS items.
Exit
UEFI BIOS Utility - Advanced Mode
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
[D.O.C.P.] When DOCP is enabled CPU
Bus frequency, CPU ratio and memory
parameters will be auto optimized.
Main
Ai Tweaker
Advanced Monitor Boot Tool
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
Current CPU Speed : 3400MHz
Target CPU Speed : 3200MHz
Current Memory Frequency : 1333MHz
Current NB Frequency : 2000MHz
Current HT Link Speed : 2000MHz
Ai Overclock Tuner Auto
CPU Ratio Auto
AMD Turbo CORE technology Auto
Memory Frequency Auto
CPU/NB Frequency Auto
HT Link Speed Auto
CPU Spread Spectrum Auto
PCIe Spread Spectrum Auto
EPU Power Saving Mode Disabled