Filter
Top Products
4-24
Chapter 4: Software support
Chapter 4
4.3.8 USB Charger+
USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using the USB Charger+, ensure to disable the ErP Ready item from the
Advanced > APM > ErP Ready in the Advanced mode of the BIOS setup program.
Launching USB Charger+
To launch USB Charger+, click or tap the on the top edge of the AI Suite 3 main menu,
then select USB Charger+.
USB Charger+ screen
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user manual for more details.
• The USB Charger+ does not support USB hubs, USB extension cables, and generic
USB cables.
• The USB Charger+ may not recognize some ASUS devices due to a special design.
Click or tap
to detect the
connected USB
device
Click or tap
to apply the
settings
Click or tap
to discard the
settings
Click or tap
to fast-charge
your USB
device
Indicates that
the connected
USB device
is in charging
mode
Click or tap to
stop charging
your USB
device
Click or tap to select the type of USB device
that you wish to charge when the system is off