Asus SP97 Computer Hardware User Manual


 
76 ASUS SP97-V User’s Manual
IX. SOFTWARE DRIVERS
(Windows 3.1)
IX. Software Drivers
1.2 Installation
1.2.1 Unpack & Copy
To unpack and copy drivers to where they should reside, please follow the following
procedures:
1. Boot up Windows using standard VGA mode.
2. In Windows Program Manager Screen, choose “File” item.
3. In “File Item List”, choose “Run” item.
4. In “Run” Screen, select your driver source. e.g. D:\MM\WIN31\SETUP.EXE
5. Follows the directions appeared on the screen to complete the unpack & copy
procedures.
6. After unpack & copy complete, a SiS Multimedia Vx.xx” program group would
be created and shown on screen.
7. In the “SiS Multimedia Vx.xx” program group, there would be five icons:
(1) SiS Multimedia Manager: To create a small “SiS Multimedia” icon on the
corner of the screen.
(2) SVGA Setup: SiS VGA graphics configuration system
(3) SiS MMPlayer: To create a SiS MMPlayer” VCP-like icon on the screen.
(4) Center Screen:An utility to adjust the position of display on the screen.
(5) Uninstall utility.
1.2.2 Graphics Setup
1. In “SiS Multimedia Vx.xx” program group, choose “SVGA Setup” icon to
enter “SiS VGA Configuration System” screen.
2. In “SiS VGA Configuration System” Screen, choose which options you would
like to use.
3. After completing your selections, choose “OK” to make all your selections
effective.
4. Choose “Restart Winodws” to re-boot Windows using new settings. Or, choose
“Continue” to continue your current Windows processes. (But when you
re-boot Windows, the new settings would take effect.)