Filter
Top Products
20 ASUS TUSL2-M User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
4) Onboard Audio CODEC Setting (AUD_EN1)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jumpers.
Disable the onboard audio CODEC if you are using an ISA or PCI audio card on
any of the expansion slots or a primary audio/modem CNR on a CNR slot (see
CNR Slot later in this section). If using a PCI audio expansion card, Onboard
AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be
disabled.
Setting AUD_EN1
Enable [1-2] (default)
Disable [2-3]
5) Onboard LAN Setting (LAN_EN)
The onboard LAN may be enabled/disabled with this jumper.
Setting LAN_EN
Enable [1-2] (default)
Disable [2-3]
TUSL2-M
®
TUSL2-M Audio Codec Setting
AUD_EN1
Enable
(Default)
1
2
Disable
2
3
TUSL2-M
®
TUSL2-M On Board Lan Setting
Enable
(default)
Disable
12
2
3
LAN_EN