Filter
Top Products
ASUS TUSL2-M User’s Manual 57
4. BIOS SETUP
4. BIOS SETUP
Main Menu
Halt On [All Errors]
This field determines which types of errors will cause the system to halt.
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but
Disk] [All but Disk/Keyboard]
Installed Memory [XXX MB]
This display-only field displays the amount of conventional memory detected
by the system during bootup. You do not need to make changes to this field.
A Note about Passwords
The BIOS Setup program allows you to specify passwords in the Main menu.
The passwords control access to the BIOS during system startup. The passwords
are not case sensitive. In other words, it makes no difference whether you enter
a password using upper or lowercase letters. The BIOS Setup program allows
you to specify two separate passwords: a Supervisor password and a User
password. When disabled, anyone may access all BIOS Setup program
functions. When enabled, the Supervisor password is required for entering the
BIOS Setup program and having full access to all configuration fields.
Forgot the Password?
If you forgot the password, you can clear the password by erasing the CMOS Real
Time Clock (RTC) RAM. The RAM data containing the password information is
powered by the onboard button cell battery. To erase the RTC RAM: (1) Unplug
your computer, (2) Short the solder points, (3) Turn ON your computer, (4) Hold
down <Delete> during bootup and enter BIOS setup to re-enter user preferences.
TUEG-VM
®
TUEG-VM Clear RTC RAM
Short solder points
to Clear CMOS
R210