Filter
Top Products
22 ASUS TUSL2-M User’s Manual
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
7) CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
AGP, and the PCI bus. This allows the selection of the CPU’s External frequency.
IMPORTANT:
1. In JumperFree mode, all dip switches must be set to OFF.
2. When JumperFree mode is enabled, use BIOS setup in place of these switches
(see CPU Internal Frequency in 4.4 Advanced Menu).
NOTE: Only selected switches are illustrated. For a complete frequency listing,
see next page.
TUSL2-M
®
TUSL2-M CPU External
Clock (BUS) Frequency Selection
DSW
CPU
SDRAM
AGP
PCI
ON
12345
(JumperFree Mode)
ON
12345
133MHz
100MHz
66MHz
33MHz
ON
12345
133MHz
133MHz
66MHz
33MHz
ON
12345
100MHz
100MHz
66MHz
33MHz
66MHz
100MHz
66MHz
33MHz
ON
12345
NOTE: If your processor does not have a locked Frequency Multiple, you must
use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu to set the Frequency
Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in
BIOS setup will have no effect.