Filter
Top Products
5-20 Chapter 5: BIOS setup
5.7 Power Management Setup
The Power Management Setup menu items allow you to change the
settings for the Advanced Power Management (APM) and Advanced
Configuration and Power Interface (ACPI).
ACPI Function [Enabled]
Allows you to enable or disable the ACPI support for the operating system.
Configuration options: [Enabled] [Disabled]
ACPI Suspend Type [S3(STR)]
Allows you to select the ACPI state used for system suspend.
Configuration options: [S1(POS)] [S3(STR)]
Off by Power Button [Instant-Off]
When set to [Instant-Off], the system goes to soft-off when you press
the power button for less than 4 seconds. When set to [Delay 4 Sec],
press the power button for more than 4 seconds to power off the system.
Configuration options: [Instant-Off] [Delay 4 Sec]
Resume by PCI PME [Disabled]
Enables or disables system wake-up by power management event (PME).
Configuration options: [Disabled] [Enabled]
Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
Select Menu
Item Specific Help
Enable/Disable ACPI
support for operating
system.
: Move Enter:Select +/-/PU/PD:Value F10:Save&Exit ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F9: Optimized Defaults
ACPI Function [Enabled]
ACPI Suspend Type [S3(STR)]
Off by Power Button [Instant-Off]
Resume by PCI PME [Disabled]
Resume by Ring [Disabled]
Resume by USB (S3) [Enabled]
Resume by Alarm [Disabled]
x Date (of Month) Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
State after Power Failure [Off]