Asus X99-A Computer Hardware User Manual


 
3-18
Chapter 3: BIOS setup
Chapter 3
Internal PLL Overvoltage [Auto]
This item allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the
extreme overclocking capability.
Conguration options: [Auto] [Enabled] [Disabled]
BCLK Frequency: DRAM Frequency Ratio [Auto]
This item allows you to set the base clock frequency of the DRAM frequency ratio.
[Auto] The DRAM ratio is set to its optimized settings.
[100:100] The DRAM ratio is set to 100:100.
[100:133] The DRAM ratio is set to 100:133.
DRAM Frequency [Auto]
This item allows you to set the memory operating frequency. The congurable options vary
with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized
setting.
Conguration options: [DDR4-800MHz] [DDR4-1000MHz] [DDR4-1067MHz] [DDR4-
1200MHz] [DDR4-1333MHz] [DDR4-1400MHz] [DDR4-1600MHz] [DDR4-1800MHz]
[DDR4-1866MHz] [DDR4-2000MHz] [DDR4-2133MHz] [DDR4-2200MHz] [DDR4-2400MHz]
[DDR4-2600MHz] [DDR4-2666MHz] [DDR4-2800MHz] [DDR4-2933MHz] [DDR4-3000MHz]
[DDR4-3200MHz]
OC Tuner [Keep Current Settings]
This item allows you to automatically overclock the CPU and DRAM frequencies and voltages
for an enhanced system performance. It also accelerates the CPU graphics performance to
the extreme depending on the CPU graphics loading.
Conguration options: [Keep Current Settings] [Ratio Tuning] [BCLK + Ratio Tuning]
Ensure that you installed an efcient CPU fan for CPU tuning before selecting either [Ratio
Tuning] or [BCLK + Ratio Tuning]. To keep the current overclocking tuner status, select
[Keep Current Settings].
EPU Power Saving Mode [Disabled]
The ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption
settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best
energy saving condition.
Conguration options: [Disabled] [Enabled]
DRAM Timing Control
The subitems in this menu allow you to set the DRAM timing control features. Use the <+>
or <-> keys to adjust the value. To restore the default setting, type [auto] using the keyboard
and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.