Filter
Top Products
CL1308 / CL1316 User Manual
10
Standard Rack Mounting
A standard rack mounting kit is provided with your CL1308 / CL1316 and can
be mounted in 1U of rack space. The installation procedures are described in
the following sections. Below is an image of the parts included with your
package that will be needed for rack installation.
Note: 1. It takes two people to mount the switch: one to hold it in place, the
other to screw it in.
2. The standard rack mounting kit does not include screws or cage nuts.
If you need additional screws or cage nuts, contact your rack dealer.
3. Allow at least 5.1 cm on each side for proper ventilation, and at least
12.7 cm at the back for the power cord and cable clearance.
4. Optional mounting kits – including single person Easy Installation
kits – are available with a separate purchase. See Optional Rack
Mounting, page 65 for details.
Side Mountng
Brackets
L Brackets