Filter
Top Products
Installation
To install the CN-6000, refer to the diagram below (the diagram numbers
correspond to the numbered steps), and do the following:
1. Plug the local administrator’s keyboard, mouse, and monitor into the
unit’s Console Ports.
2. Use the KVM cable provided with this package to connect the CN-6000’s
KVM Port, to the Keyboard, Video and Mouse ports of the server or
KVM switch that you are installing.
3. Plug the LAN or WAN cable into the CN-6000’s RJ-45 socket.
4. Plug the power adapter cable into the CN-6000’s power jack, then plug
the power adapter into an AC power source.
5. Power up your server or KVM installation.
1
4
3
KVM Switch
2
5
2005-09-20
2. Hardware Setup
9