ATEN Technology CS-104 Switch User Manual


 
Three Stages:
Similar to a
Two-Stage
configuration, more computers can be controlled by adding another layer of CS-
104 units. In a three-stage system the maximum number of computers that can be controlled is increased
to 64. The DIP switch #4 on the first stage unit (The CS-104 directly connected to the monitor, mouse,
and keyboard) is placed in the ON position. All other CS-104 units have DIP switch #4 in the OFF posi-
tion. Computers may now be connected to the first stage CS-104, the second stage units, or the thirrd stage
units. The 5-pin DIN is for an AT style PC keyboard and the 6-pin mini-DIN is for a PS/2 style key
board. You can use either port for each computer. NOTE: To connect the keyboard ports of the second or
Keyboard
Video
Mouse
Second Stage CS-104
Use AT style 5-pin DIN Keyboard connector
Set DIP Switch #4 to the OFF Position
Third Stage CS-104
Use AT style 5-pin DIN
Keyboard connector
Set DIP Switch #4 to the
Fig. 3: A Three Stage installation of the CS-104